Overview
What are EtherNet/IP Modules?
EtherNet/IP modules are industrial communication interfaces that allow Programmable Logic Controllers (PLCs), Distributed Control Systems (DCS), and remote I/O to communicate over an Ethernet backbone. Using the Common Industrial Protocol (CIP), these modules manage high-speed data exchange for real-time control and information. They are essential for integrating variable speed drives, HMI panels, and sensors into a unified factory network.
Unlike basic serial communications, EtherNet/IP modules support high bandwidth and standard networking hardware, enabling seamless integration between the plant floor and enterprise-level IT systems.
Main Manufacturers
PALM Parts Solution stocks and distributes EtherNet/IP modules from the industry’s leading automation brands:
- Allen-Bradley (Rockwell Automation): The primary developer of EtherNet/IP, offering the widest range of native modules.
- Siemens: Providing SIMATIC communication processors for multi-vendor integration.
- Mitsubishi Electric: EtherNet/IP capability for MELSEC iQ-R and iQ-F series.
- Schneider Electric: Modicon modules supporting industrial Ethernet standards.
- Omron: Sysmac-integrated modules for high-speed machine control.
- ABB, Delta Electronics, Lenze, and B&R Industrial Automation: Specialized modules for drive control and modular I/O systems.
Typical Applications
EtherNet/IP modules are utilized in environments where high-speed synchronization and data transparency are required:
- Motion Control: Coordinating Kinetix or SINAMICS drives for precision multi-axis movements.
- Remote I/O Expansion: Connecting localized sensor clusters to a central ControlLogix or CompactLogix rack.
- SCADA Integration: Funneling real-time machine telemetry into Ignition, FactoryTalk View, or Aveva monitoring systems.
- Safety Systems: Implementing CIP Safety over EtherNet/IP to manage emergency stops and light curtains without separate wiring.
Selection Guide: Replacement & Compatibility
When replacing an EtherNet/IP module, it is critical to match the hardware revision and firmware version to ensure backplane compatibility.
- Migration Paths: For older Allen-Bradley systems, migrating from 1756-ENBT to 1756-EN2T or 1756-EN3TR offers significantly higher connection counts and packet rates.
- Cross-Brand Integration: If you are using a Siemens SIMATIC S7-1500 in an EtherNet/IP environment, you will require a specialized communication processor or a gateway to bridge the protocol gap to PROFINET.
- Physical Ports: Choose between RJ45 copper ports for standard distances or SFP fiber optic ports for environments with high electromagnetic interference (EMI) or long-distance runs between facilities.
2 products · Lenze
Frequently asked questions
What is the difference between standard Ethernet and EtherNet/IP?
EtherNet/IP (Ethernet Industrial Protocol) is an industrial network protocol that adapts the Common Industrial Protocol (CIP) to standard Ethernet. Unlike standard Ethernet used in offices, EtherNet/IP is designed for industrial automation, supporting real-time I/O messaging and information exchange between PLCs, drives, and I/O devices.
Can I connect a Siemens PLC to an Allen-Bradley EtherNet/IP network?
While both use Ethernet hardware, they are not natively compatible. EtherNet/IP is based on the Common Industrial Protocol (CIP) and is common in Rockwell/Allen-Bradley systems. PROFINET is based on the PROFIBUS standard and is the primary protocol for Siemens SIMATIC systems. Communication between the two requires a protocol gateway or a multi-protocol module.
Do EtherNet/IP modules support ring topologies?
Yes, many modern EtherNet/IP modules, such as those for Allen-Bradley ControlLogix or Schneider Electric Modicon, support "Dual-IP" or "Device Level Ring" (DLR) topologies. This allows for media redundancy, ensuring the network remains operational even if a single cable is disconnected or damaged.
What are the key specifications to check when buying an EtherNet/IP module?
When selecting a module, confirm the maximum number of CIP connections, the requested packet interval (RPI) capabilities, and the number of supported Ethernet ports. You must also ensure compatibility with your existing backplane (e.g., 1756 for ControlLogix or 1769 for CompactLogix).
How do I troubleshoot a 'Request Timed Out' error on an EtherNet/IP module?
Key indicators include the 'Link' and 'Activity' LEDs (hardware connection), and the 'Module Status' or 'Network Status' LEDs. A steady green light typically indicates an active connection with an assigned IP, while flashing red usually indicates an IP address conflict or a connection timeout.