Lenze 8400 & i500 Drives — Available Products
Lenze E84AVSCE3712SX0
$1,024.99
Lenze E84AVSCE5514SB0
$1,421.00
Lenze E84AVSCE5524SB0
$3,245.00
Lenze E84AVSCE7512SX0
$1,206.99
Lenze E84AVSCE7514SX0
$1,523.99
Lenze E84AVTCE1134SB0
$8,561.00
Lenze E84AVTCE1524SB0
$7,186.99
Lenze E84AVTCE5524VX0
$11,019.99
Lenze i5CA50020000A0000S
$423.99
Lenze i5CA5002000VA0000S
$340.99
Overview
This Lenze family covers the 8400 inverter platform and the i500 range catalogued alongside it. It holds 8 catalogued part numbers, all classified as Low Voltage VFDs.
Series in this family
- E84A 8400 Series Inverter Drives — 8 catalogued parts under the E84A / E84 type-code prefixes.
- i500 Inverter Drives — the later modular range, referenced by full type codes such as I5CA50020000A0000S; no parts catalogued at present.
Lenze type codes are long by design: they encode power rating, supply, control mode and interface options in a single string, so a drive must be matched on the complete code rather than on family and kW. Open the 8400 series for the catalogued list, or send the full type code with a quote request for an i500 or 8400 variant that is not yet listed.
Machine down? Get a fast quote on Lenze 8400 & i500 Drives parts.
New, surplus, and refurbished Lenze options. Request a quote or speak directly with an automation specialist for emergency sourcing.
Common Faults
Common Faults
- Capacitor degradation after 7–10 years of service
- Communication errors after firmware drift
- Input/output channel failure from over-voltage events
- Cooling fan failure causing thermal shutdown
- Connector wear in high-vibration installations
Troubleshooting Basics
Troubleshooting
- Confirm supply voltage and grounding
- Inspect diagnostic LEDs and fault codes
- Verify firmware/configuration matches the application
- Swap with a known-good unit to isolate the fault
- Check field wiring and termination
Replacement Options
Replacement Options
- Direct OEM replacement (preferred)
- Refurbished OEM unit (cost-effective)
- Compatible cross from the same manufacturer's current catalog
- Equivalent from an alternative manufacturer (engineering review required)
Migration Recommendations
Migration Path
When migrating away from discontinued units, plan for: firmware compatibility, wiring changes, software/configuration migration, spare-parts stock, and field commissioning. Palm Parts Solution can supply both the current generation and stock of the legacy unit while you plan the migration.
Compatibility
Compatibility
Units in this family are compatible with the manufacturer's standard control architecture, communication protocols (where applicable), and accessory ecosystem. Always cross-reference the exact catalog number, firmware revision, and hardware series before installation.
Browse by Series
E84A 8400 Series Inverter Drives series — specifications, replacements, and availability. New, surplus, and refurbished stock with warranty.
Product Types in this Family
Frequently Ordered Together
Frequently Ordered
Customers ordering from this family frequently pair the unit with matching cables, terminal blocks, mounting kits, and surge protection. Contact our team for a complete BOM review.
Compatible & related families
Why Buy From Palm Parts Solution
DHL, FedEx, UPS — door-to-door in 1-4 business days.
RFQs sent during business hours are answered the same business day.
New, surplus and refurbished Lenze options — request current availability.
24/7 emergency sourcing for production-critical failures.
Custom pricing on volume, repair, and hard-to-find SKUs.
Talk to engineers, not call-center agents.
We hunt down discontinued and obsolete parts globally.
Lifecycle-end Lenze parts — sourced, tested, warrantied.
Frequently asked questions
What is the Lenze 8400 Series family used for?
The Lenze 8400 Series family from Lenze covers industrial automation applications such as machine control, process control, motor control and discrete I/O. Browse the series below to find the exact part number for your installation.
Are obsolete Lenze 8400 Series parts still available?
Yes. We stock new surplus, refurbished and end-of-life Lenze 8400 Series units from Lenze. If a part number is no longer in production we will identify a compatible replacement or repair your existing module.
How do I identify the correct Lenze 8400 Series replacement?
Match the catalog number printed on the Lenze 8400 Series label, then confirm voltage, I/O count, communication protocol and firmware revision. Our team can validate compatibility against your original Lenze configuration before shipment.
Do Lenze 8400 Series parts come tested?
Every Lenze 8400 Series unit we ship is functionally tested against Lenze OEM specifications. Refurbished items include a 1-year warranty and a full inspection report on request.