Omron HMI — Available Products
Omron NA5-12W101B-V1
$4,068.00
Omron NA5-7W001B-V1
$3,546.00
Omron NB3Q-TW01B
$546.99
Omron NB5Q-TW00B
$452.99
Omron NB5Q-TW01B
$704.00
Omron NB7W-TW00B
$360.00
Omron NB7W-TW01B
$478.00
Omron NB7W-TW01B-V1
$674.99
Omron NS10-TV00-V2
$1,739.99
Omron NS10-TV01B-V2
$1,902.99
Omron NS12-TS01B-V2
$1,786.99
Omron NS15-TX01B-V2
$5,370.99
Omron NS5-SQ10-V2
$906.00
Omron NS5-SQ10B-V2
$943.99
Omron NS5-SQ11-V2
$1,169.00
Omron NS5-SQ11B-V2
$1,169.99
Overview
Omron HMI panels are catalogued here as one operator-interface line. The family holds 16 catalogued part numbers, all classified as Touch Screen HMIs, across three panel generations.
Series in this family
- NS Series HMI — 8 catalogued parts under the NS1 and NS5 type codes.
- NB Series HMI — 6 catalogued parts under NB3, NB5 and NB7.
- NA Series HMI — 2 catalogued parts under NA5.
The type code identifies both the generation and the screen size, and the suffix carries the interface and colour variant, so panels are matched on the complete code rather than by display size alone. Choose the generation your machine runs and open that series for the catalogued parts, or send the full Omron type code with a quote request.
Machine down? Get a fast quote on Omron HMI parts.
New, surplus, and refurbished Omron options. Request a quote or speak directly with an automation specialist for emergency sourcing.
Common Faults
Common Faults
- Capacitor degradation after 7–10 years of service
- Communication errors after firmware drift
- Input/output channel failure from over-voltage events
- Cooling fan failure causing thermal shutdown
- Connector wear in high-vibration installations
Troubleshooting Basics
Troubleshooting
- Confirm supply voltage and grounding
- Inspect diagnostic LEDs and fault codes
- Verify firmware/configuration matches the application
- Swap with a known-good unit to isolate the fault
- Check field wiring and termination
Replacement Options
Replacement Options
- Direct OEM replacement (preferred)
- Refurbished OEM unit (cost-effective)
- Compatible cross from the same manufacturer's current catalog
- Equivalent from an alternative manufacturer (engineering review required)
Migration Recommendations
Migration Path
When migrating away from discontinued units, plan for: firmware compatibility, wiring changes, software/configuration migration, spare-parts stock, and field commissioning. Palm Parts Solution can supply both the current generation and stock of the legacy unit while you plan the migration.
Compatibility
Compatibility
Units in this family are compatible with the manufacturer's standard control architecture, communication protocols (where applicable), and accessory ecosystem. Always cross-reference the exact catalog number, firmware revision, and hardware series before installation.
Browse by Series
NA Series HMI series — specifications, replacements, and availability. New, surplus, and refurbished stock with warranty.
NB Series HMI series — specifications, replacements, and availability. New, surplus, and refurbished stock with warranty.
NS Series HMI series — specifications, replacements, and availability. New, surplus, and refurbished stock with warranty.
Product Types in this Family
Frequently Ordered Together
Frequently Ordered
Customers ordering from this family frequently pair the unit with matching cables, terminal blocks, mounting kits, and surge protection. Contact our team for a complete BOM review.
Compatible & related families
Why Buy From Palm Parts Solution
DHL, FedEx, UPS — door-to-door in 1-4 business days.
RFQs sent during business hours are answered the same business day.
New, surplus and refurbished Omron options — request current availability.
24/7 emergency sourcing for production-critical failures.
Custom pricing on volume, repair, and hard-to-find SKUs.
Talk to engineers, not call-center agents.
We hunt down discontinued and obsolete parts globally.
Lifecycle-end Omron parts — sourced, tested, warrantied.
Frequently asked questions
What is the Omron HMI family used for?
The Omron HMI family from Omron covers industrial automation applications such as machine control, process control, motor control and discrete I/O. Browse the series below to find the exact part number for your installation.
Are obsolete Omron HMI parts still available?
Yes. We stock new surplus, refurbished and end-of-life Omron HMI units from Omron. If a part number is no longer in production we will identify a compatible replacement or repair your existing module.
How do I identify the correct Omron HMI replacement?
Match the catalog number printed on the Omron HMI label, then confirm voltage, I/O count, communication protocol and firmware revision. Our team can validate compatibility against your original Omron configuration before shipment.
Do Omron HMI parts come tested?
Every Omron HMI unit we ship is functionally tested against Omron OEM specifications. Refurbished items include a 1-year warranty and a full inspection report on request.