Magelis HMI — Available Products
Schneider Electric HMIDT551
$1,602.99
Schneider Electric HMIDT642
$4,209.00
Schneider Electric HMIDT732
$3,834.00
Schneider Electric HMIG3U
$1,177.99
Schneider Electric HMIGTO2310
$1,340.99
Schneider Electric HMIGTO4310
$1,372.99
Schneider Electric HMIGTO5310
$1,204.00
Schneider Electric HMIGTO6310
$1,568.00
Schneider Electric HMIGXU3512
$381.99
Schneider Electric HMIGXU5512
$678.99
Schneider Electric HMIST6600
$1,894.99
Schneider Electric HMISTU655
$707.99
Schneider Electric HMISTU855
$729.00
Overview
Schneider Electric Magelis is the operator-panel line for Schneider control systems, and this family is its catalogue hub. It holds 13 catalogued part numbers, all classified as Touch Screen HMIs.
Series in this family
- HMI / Magelis Displays — 13 catalogued parts across the HMI and XBT reference prefixes.
The prefix marks the generation: XBT references belong to the earlier Magelis panels, while HMI references belong to the later ranges. Screen size, communication ports and firmware variant are all carried in the complete reference, so panels must be matched on the full code printed on the unit. Open the series page for the catalogued references, or send the HMI/XBT reference with a quote request.
Machine down? Get a fast quote on Magelis HMI parts.
New, surplus, and refurbished Schneider Electric options. Request a quote or speak directly with an automation specialist for emergency sourcing.
Common Faults
Common Faults
- Capacitor degradation after 7–10 years of service
- Communication errors after firmware drift
- Input/output channel failure from over-voltage events
- Cooling fan failure causing thermal shutdown
- Connector wear in high-vibration installations
Troubleshooting Basics
Troubleshooting
- Confirm supply voltage and grounding
- Inspect diagnostic LEDs and fault codes
- Verify firmware/configuration matches the application
- Swap with a known-good unit to isolate the fault
- Check field wiring and termination
Replacement Options
Replacement Options
- Direct OEM replacement (preferred)
- Refurbished OEM unit (cost-effective)
- Compatible cross from the same manufacturer's current catalog
- Equivalent from an alternative manufacturer (engineering review required)
Migration Recommendations
Migration Path
When migrating away from discontinued units, plan for: firmware compatibility, wiring changes, software/configuration migration, spare-parts stock, and field commissioning. Palm Parts Solution can supply both the current generation and stock of the legacy unit while you plan the migration.
Compatibility
Compatibility
Units in this family are compatible with the manufacturer's standard control architecture, communication protocols (where applicable), and accessory ecosystem. Always cross-reference the exact catalog number, firmware revision, and hardware series before installation.
Browse by Series
Product Types in this Family
Frequently Ordered Together
Frequently Ordered
Customers ordering from this family frequently pair the unit with matching cables, terminal blocks, mounting kits, and surge protection. Contact our team for a complete BOM review.
Compatible & related families
Why Buy From Palm Parts Solution
DHL, FedEx, UPS — door-to-door in 1-4 business days.
RFQs sent during business hours are answered the same business day.
New, surplus and refurbished Schneider Electric options — request current availability.
24/7 emergency sourcing for production-critical failures.
Custom pricing on volume, repair, and hard-to-find SKUs.
Talk to engineers, not call-center agents.
We hunt down discontinued and obsolete parts globally.
Lifecycle-end Schneider Electric parts — sourced, tested, warrantied.
Frequently asked questions
What is the Magelis HMI family used for?
The Magelis HMI family from Schneider Electric covers industrial automation applications such as machine control, process control, motor control and discrete I/O. Browse the series below to find the exact part number for your installation.
Are obsolete Magelis HMI parts still available?
Yes. We stock new surplus, refurbished and end-of-life Magelis HMI units from Schneider Electric. If a part number is no longer in production we will identify a compatible replacement or repair your existing module.
How do I identify the correct Magelis HMI replacement?
Match the catalog number printed on the Magelis HMI label, then confirm voltage, I/O count, communication protocol and firmware revision. Our team can validate compatibility against your original Schneider Electric configuration before shipment.
Do Magelis HMI parts come tested?
Every Magelis HMI unit we ship is functionally tested against Schneider Electric OEM specifications. Refurbished items include a 1-year warranty and a full inspection report on request.