Cables & Connectors — Available Products
Siemens 6FX2001-3CB02
$980.00
Siemens 6FX2003-0LU10
$530.00
Siemens 6FX2007-1AC14
$6,018.00
Siemens 6FX8002-2EQ10-1AJ0
$250.00
Siemens 6FX8002-2EQ10-1BA0
$340.00
Siemens 6FX8002-2EQ10-1BB0
$880.00
Siemens 6FX8002-2EQ10-1BF0
$345.00
Siemens 6FX8002-5CA01-1BF0
$330.00
Overview
Siemens cables and connectors in this family cover the 6FX motion-control cable range used between Siemens drives and motors. The family holds 8 catalogued part numbers, classified as Servo / Feedback Cables (7) and Servo Drives / Amplifiers (1).
Series in this family
- 6FX Motion Control Cables — 8 catalogued parts across the 6FX2, 6FX5 and 6FX8 order-number ranges.
The 6FX block identifies the cable generation and type — power or signal/feedback — and the trailing digits carry connector type and length. Because length and connector coding are part of the order number, a cable assembly cannot be substituted by description alone. Open the series page for the catalogued list, or send the complete 6FX order number with a quote request for a length that is not shown.
Machine down? Get a fast quote on Cables & Connectors parts.
New, surplus, and refurbished Siemens options. Request a quote or speak directly with an automation specialist for emergency sourcing.
Common Faults
Common Faults
- Capacitor degradation after 7–10 years of service
- Communication errors after firmware drift
- Input/output channel failure from over-voltage events
- Cooling fan failure causing thermal shutdown
- Connector wear in high-vibration installations
Troubleshooting Basics
Troubleshooting
- Confirm supply voltage and grounding
- Inspect diagnostic LEDs and fault codes
- Verify firmware/configuration matches the application
- Swap with a known-good unit to isolate the fault
- Check field wiring and termination
Replacement Options
Replacement Options
- Direct OEM replacement (preferred)
- Refurbished OEM unit (cost-effective)
- Compatible cross from the same manufacturer's current catalog
- Equivalent from an alternative manufacturer (engineering review required)
Migration Recommendations
Migration Path
When migrating away from discontinued units, plan for: firmware compatibility, wiring changes, software/configuration migration, spare-parts stock, and field commissioning. Palm Parts Solution can supply both the current generation and stock of the legacy unit while you plan the migration.
Compatibility
Compatibility
Units in this family are compatible with the manufacturer's standard control architecture, communication protocols (where applicable), and accessory ecosystem. Always cross-reference the exact catalog number, firmware revision, and hardware series before installation.
Browse by Series
Product Types in this Family
Frequently Ordered Together
Frequently Ordered
Customers ordering from this family frequently pair the unit with matching cables, terminal blocks, mounting kits, and surge protection. Contact our team for a complete BOM review.
Compatible & related families
Why Buy From Palm Parts Solution
DHL, FedEx, UPS — door-to-door in 1-4 business days.
RFQs sent during business hours are answered the same business day.
New, surplus and refurbished Siemens options — request current availability.
24/7 emergency sourcing for production-critical failures.
Custom pricing on volume, repair, and hard-to-find SKUs.
Talk to engineers, not call-center agents.
We hunt down discontinued and obsolete parts globally.
Lifecycle-end Siemens parts — sourced, tested, warrantied.
Frequently asked questions
What is the Cables & Connectors family used for?
The Cables & Connectors family from Siemens covers industrial automation applications such as machine control, process control, motor control and discrete I/O. Browse the series below to find the exact part number for your installation.
Are obsolete Cables & Connectors parts still available?
Yes. We stock new surplus, refurbished and end-of-life Cables & Connectors units from Siemens. If a part number is no longer in production we will identify a compatible replacement or repair your existing module.
How do I identify the correct Cables & Connectors replacement?
Match the catalog number printed on the Cables & Connectors label, then confirm voltage, I/O count, communication protocol and firmware revision. Our team can validate compatibility against your original Siemens configuration before shipment.
Do Cables & Connectors parts come tested?
Every Cables & Connectors unit we ship is functionally tested against Siemens OEM specifications. Refurbished items include a 1-year warranty and a full inspection report on request.