130 products
Mitsubishi R60DAI8
$1,351.99
Mitsubishi RX41C4
$367.99
Mitsubishi RX41C4-TS
$367.99
Omron CJ1W-DA021
$237.00
Omron CJ1W-DA041
$421.00
Omron CJ1W-DA08C
$465.99
Omron CJ1W-DA08V
$297.00
Omron CP1W-DA041
$293.00
Omron NX-AD4203
$721.99
Omron NX-DA2603
$508.00
Omron NX-DA3603
$599.99
Schneider Electric BMXAMO0210
$446.00
Schneider Electric BMXAMO0410
$711.00
Schneider Electric BMXAMO0802
$807.00
Schneider Electric BMXNOM0200
$638.00
Schneider Electric TM3AQ2
$316.00
Schneider Electric TM3AQ4
$296.99
Schneider Electric TM3AQ4G
$337.00
SIEMENS 6ES7134-6GF00-0AA1
$378.00
Siemens 6ES7135-4FB01-0AB0
$220.00
SIEMENS 6ES7135-4GB01-0AB0
$302.00
SIEMENS 6ES7135-6HB00-0CA1
$412.00
SIEMENS 6ES7135-6HD00-0BA1
$387.00
SIEMENS 6ES7136-6BA01-0CA0
$520.00
Browse by manufacturer
Related families and series
Product families
- EtherCAT Terminals (16)
- MELSEC PLCs (14)
- CompactLogix (9)
- Siemens PLCs (9)
- ControlLogix (8)
- Omron PLCs (8)
- VersaMax PLCs (8)
- Siemens — Miscellaneous Parts (7)
What are Analog Output Modules?
Analog output modules are specialized PLC components that convert digital signals from the processor into continuous electrical signals. Unlike digital modules that operate in binary (ON/OFF) states, analog modules provide a variable output, typically used to control the speed of a Variable Frequency Drive (VFD), the position of a proportional valve, or the setpoint of a temperature controller. These modules are essential for any industrial process requiring precise, incremental adjustments rather than simple switching.
Main Manufacturers
Palm Parts Solution stocks high-performance analog output modules from the industry’s leading automation brands:
- Allen-Bradley: Including the high-density ControlLogix (1756) and CompactLogix (1769/1768) series.
- Siemens: Featuring SIMATIC S7-1200, S7-1500, and ET 200MP/SP distributed I/O.
- Mitsubishi Electric: MELSEC iQ-R, iQ-F, and legacy Q-Series modules.
- Schneider Electric: Modicon M340, M580, and Lexium servo control interface modules.
- GE Fanuc / Emerson: Series 90-30 and PACSystems RX3i modules.
- Beckhoff: EtherCAT Terminals (EL series) and Bus Terminals (KL series).
- B&R Industrial Automation: X20 System and 8LS servo-related outputs.
- Delta Electronics: DVP and AS Series PLC analog modules.
- Omron: CJ1, CS1, and NX-series I/O.
Typical Applications
Analog output modules are critical for "loop control" in various sectors:
- Motor Speed Control: Sending a 0-10V signal to a PowerFlex or SINAMICS drive to modulate RPM.
- Process Heating: Controlling SCR power controllers to maintain specific temperatures in plastic extrusion.
- Fluid Dynamics: Operating proportional valves to manage flow rates or pressure in hydraulic systems.
- Actuator Positioning: Driving linear actuators or dampers in HVAC and manufacturing cells.
Selection Guide
When selecting an analog output module, prioritize the following technical specifications:
- Output Type: Determine if your device requires a Voltage output (0-10V) or a Current loop (4-20mA).
- Resolution: Standard 12-bit is sufficient for many VFDs, but 16-bit is required for high-precision laboratory or dosing applications.
- Isolation: Ensure the module provides channel-to-channel or channel-to-backplane isolation to prevent ground loops and protect the PLC CPU.
- Update Time: For high-speed motion or pressure control, check the module’s conversion speed (milliseconds or microseconds).
- Channel Density: Options range from 2-channel modules for small machines to 16-channel modules for centralized control panels.
Related guides
This engineering guide details the path for upgrading obsolete 1756-L61 controllers to modern 1756-L71 or 1756-L81E modules, focusing on hardware, network, and firmware mapping.
Transitioning from legacy Allen-Bradley 1769 CompactLogix to the high-performance 5069 L3 platform requires deliberate planning. This technical guide outlines hardware, wiring, and code migration steps.
This technical guide details the migration pathway for legacy Allen-Bradley 1769-L32E controllers. Learn how to address software conversion, physical footprint modifications, and communication standard changes.
Transition your legacy Allen-Bradley 1756-L63 controller to modern ControlLogix 5580 hardware. This guide details direct replacement paths, firmware considerations, and software migrations.
Frequently asked questions
What is the function of an analog output module?
Analog output modules convert digital binary data from the PLC CPU into a continuous physical quantity, such as a 0-10V voltage or 4-20mA current signal. This allows the PLC to control variable devices like proportional valves, motor speed drives, or heated elements, rather than just simple ON/OFF states.
What are the standard signal ranges for analog outputs?
Common output ranges include 0 to 10 VDC, -10 to +10 VDC, 0 to 20 mA, and 4 to 20 mA. Current loops (4-20mA) are preferred for long-distance wiring because they are less susceptible to electromagnetic interference (EMI) and can detect a broken wire if the signal drops to 0mA.
What is the difference between 12-bit and 16-bit resolution?
Resolution determines the precision of the output signal and is measured in bits. A 12-bit module provides 4,096 distinct steps, while a 16-bit module provides 65,536 steps. Higher resolution is critical for high-precision applications, such as chemical dosing or fine pressure control.
Can one module handle both voltage and current outputs?
Yes, many modern modules, such as those in the Allen-Bradley ControlLogix or Siemens SIMATIC S7 series, offer software-configurable channels. This allows you to select between voltage or current signals per point without changing physical hardware or jumpers.
What should I check when replacing an obsolete analog module?
When replacing an obsolete module (e.g., GE Fanuc 90-30 or older Mitsubishi MELSEC-A), ensure the load impedance of your field device is within the new module's driving capability. Check that the terminal block wiring is compatible or if a conversion kit is required for the newer platform (e.g., migrating to SIMATIC S7-1500).
Machine down? Get a fast quote on the parts you need.
New, surplus, and refurbished industrial automation options. Request a quote or speak directly with an automation specialist for emergency sourcing.