Distributed Control Systems — Available Products
ABB 3HAC025338-006
$7,221.99
ABB 3HAC025562-001
$1,180.99
ABB 3HAC025724-001
$8,721.00
ABB 3HAC025784-001
$891.00
ABB 3HAC025917-001
$568.99
ABB 3HAC026253-001
$2,081.99
ABB 3HAC026254-001
$1,013.99
ABB 3HAC026787-001
$1,532.99
ABB 3HAC028357-001
$2,406.00
ABB 3HAC028357-025
$200.99
ABB 3HAC028357-026
$525.99
ABB 3HAC029034-004
$6,299.99
ABB 3HAC029157-001
$1,363.99
ABB 3HAC029818-001
$4,053.00
ABB 3HAC030923-001
$3,019.99
ABB 3HAC031683-001
$388.99
ABB 3HAC031977-001
$1,593.99
ABB 3HAC032243-001
$1,554.99
ABB 3HAC032586-001
$1,547.00
ABB 3HAC033624-001
$894.99
ABB 3HAC035301-001
$4,538.00
ABB 3HAC035320-001
$1,043.00
ABB 3HAC036260-001
$4,583.99
ABB 3HAC041443-003
$3,710.99
Overview
ABB distributed control system hardware is catalogued here around the 800xA platform. The family holds 11 catalogued part numbers under ABB 3B-series article numbers.
Series in this family
- 800xA System Modules — 11 catalogued parts across the 3BD, 3BH, 3BM and 3BS article-number prefixes.
These prefixes cover the module and board hardware used inside 800xA cabinets. Article numbers are exact and revision-sensitive on this platform, so a replacement should be matched on the complete number printed on the module, including any revision suffix. Open the series page for the catalogued list, or send the full 3B article number with a quote request.
Machine down? Get a fast quote on Distributed Control Systems parts.
New, surplus, and refurbished ABB options. Request a quote or speak directly with an automation specialist for emergency sourcing.
Common Faults
Common Faults
- Capacitor degradation after 7–10 years of service
- Communication errors after firmware drift
- Input/output channel failure from over-voltage events
- Cooling fan failure causing thermal shutdown
- Connector wear in high-vibration installations
Troubleshooting Basics
Troubleshooting
- Confirm supply voltage and grounding
- Inspect diagnostic LEDs and fault codes
- Verify firmware/configuration matches the application
- Swap with a known-good unit to isolate the fault
- Check field wiring and termination
Replacement Options
Replacement Options
- Direct OEM replacement (preferred)
- Refurbished OEM unit (cost-effective)
- Compatible cross from the same manufacturer's current catalog
- Equivalent from an alternative manufacturer (engineering review required)
Migration Recommendations
Migration Path
When migrating away from discontinued units, plan for: firmware compatibility, wiring changes, software/configuration migration, spare-parts stock, and field commissioning. Palm Parts Solution can supply both the current generation and stock of the legacy unit while you plan the migration.
Compatibility
Compatibility
Units in this family are compatible with the manufacturer's standard control architecture, communication protocols (where applicable), and accessory ecosystem. Always cross-reference the exact catalog number, firmware revision, and hardware series before installation.
Browse by Series
Product Types in this Family
Frequently Ordered Together
Frequently Ordered
Customers ordering from this family frequently pair the unit with matching cables, terminal blocks, mounting kits, and surge protection. Contact our team for a complete BOM review.
Compatible & related families
Why Buy From Palm Parts Solution
DHL, FedEx, UPS — door-to-door in 1-4 business days.
RFQs sent during business hours are answered the same business day.
New, surplus and refurbished ABB options — request current availability.
24/7 emergency sourcing for production-critical failures.
Custom pricing on volume, repair, and hard-to-find SKUs.
Talk to engineers, not call-center agents.
We hunt down discontinued and obsolete parts globally.
Lifecycle-end ABB parts — sourced, tested, warrantied.
Frequently asked questions
What is the Distributed Control Systems family used for?
The Distributed Control Systems family from ABB covers industrial automation applications such as machine control, process control, motor control and discrete I/O. Browse the series below to find the exact part number for your installation.
Are obsolete Distributed Control Systems parts still available?
Yes. We stock new surplus, refurbished and end-of-life Distributed Control Systems units from ABB. If a part number is no longer in production we will identify a compatible replacement or repair your existing module.
How do I identify the correct Distributed Control Systems replacement?
Match the catalog number printed on the Distributed Control Systems label, then confirm voltage, I/O count, communication protocol and firmware revision. Our team can validate compatibility against your original ABB configuration before shipment.
Do Distributed Control Systems parts come tested?
Every Distributed Control Systems unit we ship is functionally tested against ABB OEM specifications. Refurbished items include a 1-year warranty and a full inspection report on request.