Soft Starters — Available Products
ABB PSE142-600-70
$3,174.99
ABB PSE170-600-70 | 1SFA897111R7000170
$3,353.00
ABB PSE18-600-70
$1,505.99
ABB PSE210-600-70-1
$4,813.00
ABB PSE25-600-70
$1,348.00
ABB PSE30-600-70
$2,178.00
ABB PSE37-600-70
$1,615.00
ABB PSE370-600-70-1
$6,480.99
ABB PSE60-600-70
$2,229.99
ABB PSE72-600-70
$2,277.00
ABB PSE85-600-70
$2,494.00
ABB PSR105-600-70
$1,276.00
ABB PSR12-600-11
$516.00
ABB PSR12-600-70 | 1SFA896106R7000
$323.00
ABB PSR16-600-11
$867.99
ABB PSR16-600-70 | 1SFA896107R7000
$352.99
ABB PSR25-600-70
$445.99
ABB PSR3-600-11
$736.00
ABB PSR3-600-70
$620.00
ABB PSR30-600-70 | 1SFA896109R7000
$474.99
ABB PSR37-600-70 | 1SFA896110R7000
$556.00
ABB PSR45-600-70 | Softstarter 1SFA896111R7000
$629.99
ABB PSR6-600-11
$677.00
ABB PSR6-600-70
$290.99
Overview
ABB soft starters are catalogued here as one line covering the PST/PSE/PSR ranges used for reduced-voltage motor starting. The family holds 48 catalogued part numbers.
Series in this family
- PST / PSE / PSR Soft Starters — 48 catalogued parts across the PSR, PSE, PST and PSTX type designations.
The type designation identifies the range: PSR is the compact range, PSE and PST cover the larger frames, and PSTX is the later generation. By classification the catalogued parts fall into Soft Starters (40), DIN-Rail Power Supplies (7) and Connectors (1), so a few accessory items are catalogued alongside the starters themselves. ABB type codes carry the current rating and supply voltage, so match the complete designation from the installed device. Open the series page for the catalogued list, or send the type code with a quote request.
Machine down? Get a fast quote on Soft Starters parts.
New, surplus, and refurbished ABB options. Request a quote or speak directly with an automation specialist for emergency sourcing.
Common Faults
Common Faults
- Capacitor degradation after 7–10 years of service
- Communication errors after firmware drift
- Input/output channel failure from over-voltage events
- Cooling fan failure causing thermal shutdown
- Connector wear in high-vibration installations
Troubleshooting Basics
Troubleshooting
- Confirm supply voltage and grounding
- Inspect diagnostic LEDs and fault codes
- Verify firmware/configuration matches the application
- Swap with a known-good unit to isolate the fault
- Check field wiring and termination
Replacement Options
Replacement Options
- Direct OEM replacement (preferred)
- Refurbished OEM unit (cost-effective)
- Compatible cross from the same manufacturer's current catalog
- Equivalent from an alternative manufacturer (engineering review required)
Migration Recommendations
Migration Path
When migrating away from discontinued units, plan for: firmware compatibility, wiring changes, software/configuration migration, spare-parts stock, and field commissioning. Palm Parts Solution can supply both the current generation and stock of the legacy unit while you plan the migration.
Compatibility
Compatibility
Units in this family are compatible with the manufacturer's standard control architecture, communication protocols (where applicable), and accessory ecosystem. Always cross-reference the exact catalog number, firmware revision, and hardware series before installation.
Browse by Series
Product Types in this Family
Frequently Ordered Together
Frequently Ordered
Customers ordering from this family frequently pair the unit with matching cables, terminal blocks, mounting kits, and surge protection. Contact our team for a complete BOM review.
Compatible & related families
Why Buy From Palm Parts Solution
DHL, FedEx, UPS — door-to-door in 1-4 business days.
RFQs sent during business hours are answered the same business day.
New, surplus and refurbished ABB options — request current availability.
24/7 emergency sourcing for production-critical failures.
Custom pricing on volume, repair, and hard-to-find SKUs.
Talk to engineers, not call-center agents.
We hunt down discontinued and obsolete parts globally.
Lifecycle-end ABB parts — sourced, tested, warrantied.
Frequently asked questions
What is the Soft Starters family used for?
The Soft Starters family from ABB covers industrial automation applications such as machine control, process control, motor control and discrete I/O. Browse the series below to find the exact part number for your installation.
Are obsolete Soft Starters parts still available?
Yes. We stock new surplus, refurbished and end-of-life Soft Starters units from ABB. If a part number is no longer in production we will identify a compatible replacement or repair your existing module.
How do I identify the correct Soft Starters replacement?
Match the catalog number printed on the Soft Starters label, then confirm voltage, I/O count, communication protocol and firmware revision. Our team can validate compatibility against your original ABB configuration before shipment.
Do Soft Starters parts come tested?
Every Soft Starters unit we ship is functionally tested against ABB OEM specifications. Refurbished items include a 1-year warranty and a full inspection report on request.