Closed-loop motion splits into distinct roles: a controller plans the move, a drive delivers current to the motor, and a feedback device reports actual position. This page is the hub for those roles — the subcategories below lead to the specific listing for each one, including the dedicated servo drive and amplifier page.
Browse by subcategory
- Servo Drives & AmplifiersThe power stage that closes the loop on a servo motor — the main listing in this category.
- Motion ControllersStandalone controllers that plan coordinated and interpolated moves.
- Positioning ModulesAxis modules that add motion control inside a PLC rack.
- Servo MotorsThe motors these drives run, grouped by AC, DC and linear types.
- CNC Servo AmplifiersAmplifiers tied to a CNC control rather than a general automation platform.
841 products across this category
Allen-Bradley 2094-BL02
$8,106.00
Allen-Bradley 2094-BL10S
$9,883.99
Allen-Bradley 2094-BL25S
$13,913.99
Allen-Bradley 2094-BL50S
$6,579.99
Allen-Bradley 2094-BL75S
$8,775.99
Allen-Bradley 2094-BM01-M
$2,008.00
Allen-Bradley 2094-BM01-S
$1,985.00
Allen-Bradley 2094-BM02
$2,650.99
Allen-Bradley 2094-BM02-S
$1,975.99
Allen-Bradley 2094-BM03-M
$5,241.99
Allen-Bradley 2094-BM03-S
$4,353.00
Allen-Bradley 2094-BM05-M
$5,584.00
Allen-Bradley 2094-BM05-S
$4,679.00
Allen-Bradley 2094-BMP5-M
$2,198.00
Allen-Bradley 2094-BMP5-S
$1,830.99
Allen-Bradley 2094-BSP2
$1,375.00
Allen-Bradley 2094-EN02D-M01-S0
$2,496.99
Allen-Bradley 2094-EN02D-M01-S1
$3,043.99
Allen-Bradley 2094-PRF
$108.00
Allen-Bradley 2094-PRS1
$588.00
Allen-Bradley 2094-PRS2
$1,439.99
Allen-Bradley 2094-PRS3
$1,061.00
Allen-Bradley 2094-PRS4
$2,075.99
Allen-Bradley 2094-PRS5
$1,964.00
Browse by manufacturer
Related families and series
Product families
Series
- Simodrive 611 (91)
- Sinamics S120 (79)
- ASDA Servo Drives (63)
- Kinetix 6000, 6200 & 6500 (45)
- Siemens Misc Catalog Parts (39)
- MELSERVO MR-J2 Series (37)
How closed-loop motion hardware fits together
A complete motion control system generally consists of three parts: the controller (which calculates the path), the drive (which translates the signal into electrical power), and the motor (the actuator). These components are essential for applications where synchronizing multiple axes or maintaining high dynamic response is critical to production quality and throughput.
Main Manufacturers
Palm Parts Solution stocks and distributes components from the industry's leading motion control manufacturers:
- Siemens: Known for the SINAMICS and SIMOTION lines.
- Allen-Bradley (Rockwell Automation): Leaders in the Kinetix ecosystem.
- Mitsubishi Electric: Top-tier reliability with the MELSERVO series.
- Bosch Rexroth: Specialized in high-performance IndraDrive systems.
- Lenze: Experts in gear-motor and drive integration.
- Schneider Electric: Providers of the versatile Lexium series.
- Beckhoff: Pioneers in EtherCAT-based PC-based control.
- Delta Electronics: Cost-effective, high-performing ASD series.
- Other key brands: SEW-Eurodrive, B&R Industrial Automation, Fanuc, and Omron.
Typical Applications
Servo drives and motion controllers are utilized across industries that demand repeatability and speed:
- Packaging Machinery: Coordinating film feed, rotary knives, and sealing jaws in vertical form fill seal (VFFS) machines.
- CNC Machining: Driving the X, Y, and Z axes for precision milling, turning, and grinding.
- Robotics: Controlling the joints of articulated arms and SCARA robots for pick-and-place operations.
- Semiconductor Manufacturing: Managing extremely low-tolerance movements in wafer handling.
- Printing and Converting: Maintaining precise tension and registration in high-speed web processing.
- Medical & Lab Automation: Precision dosing, liquid handling, and automated diagnostic equipment.
Popular Product Families
Navigating the various product lines is essential for finding the right hardware for your bus architecture:
- Siemens SINAMICS S120: A modular system for high-performance multi-axis applications.
- Allen-Bradley Kinetix 5500 & 5700: Designed for seamless integration with Logix controllers via EtherNet/IP.
- Mitsubishi MELSERVO-J4/J5: Renowned for high-frequency response and "One-Touch" tuning.
- Lenze i700: Optimized for multi-axis applications in central motion control architectures.
- Schneider Electric Lexium 32: Focused on compact footprints and simplified safety integration.
- Beckhoff AX5000/AX8000: Native EtherCAT drives designed for high-speed PC-based control.
- Fanuc DiS Series: Integrated servo motors and drives common in machine tool and high-end CNC applications.
Replacement & Compatibility
Upgrading or replacing servo drives often involves navigating proprietary ecosystems. However, several paths exist for modernization:
- Legacy-to-Current Migration: Moving from older Allen-Bradley Ultra3000 drives to Kinetix 5000 series often requires physical mounting adapters and updated motion profiles in Studio 5000.
- Cross-Brand Replacement: If a specific Siemens or Bosch Rexroth drive is unavailable, Delta or Omron equivalents can often be used, provided the drive supports the existing motor's feedback type (e.g., Hiperface, EnDat) and the communication protocol (PROFINET, EtherCAT).
- Integrated vs. Standalone: When replacing drives in older cabinets, many engineers move from standalone single-axis drives to modular systems with a shared DC bus to reduce wiring and heat dissipation.
Selection Guide
To select the correct servo drive or motion controller, verify the following specifications:
- Power Requirements: Check the input voltage (Single-phase 200V vs. Three-phase 480V) and the continuous/peak current rating needed by the motor.
- Feedback Compatibility: Ensure the drive supports the specific encoder type (Absolute, Incremental, SSI, etc.).
- Network Protocol: The drive must communicate with your PLC. Common standards include EtherNet/IP (Allen-Bradley), PROFINET (Siemens), and EtherCAT (Beckhoff/Omron).
- Control Mode: Determine if the application requires position control (indexing), velocity control, or torque control.
- Environmental Rating: For harsh environments, consider drives with coated circuit boards (conformal coating) or higher IP ratings for washdown areas.
- Safety Functions: Identify if Safe Torque Off (STO), Safe Stop 1 (SS1), or Safe Speed Monitor (SSM) are required for your machine safety category.
Related guides
A complete selection guide covering Kinetix 5100, 5300, 5500 and 5700 — power range, network, feedback, and motor compatibility.
How Kinetix drives, servo motors and Logix controllers work together for coordinated motion.
A practical buying guide for Allen-Bradley Kinetix Servo Drives — models, prefixes, compatibility and replacement options.
Frequently asked questions
What is the difference between a servo drive and a standard AC drive?
A servo drive receives a low-power command signal from a motion controller and amplifies it into high-power current/voltage to drive a servo motor. Unlike standard VFDs, servo drives use encoder feedback to monitor the motor's exact position, velocity, and torque, closed-loop adjustments thousands of times per second to ensure precise motion execution.
How do I select the right servo drive for my motor?
Selecting a servo drive requires matching the continuous and peak current ratings to the motor's requirements, ensuring the input voltage (e.g., 230V or 460V) is compatible, and verifying the feedback protocol (Biss-C, Hiperface, EnDat, or TTL) matches the encoder. You must also ensure the drive supports your controller’s communication protocol, such as EtherCAT, PROFINET, or EtherNet/IP.
Which communication protocols are common in motion control?
Most modern industrial servo drives and controllers communicate via real-time Ethernet protocols. The most common include EtherCAT (popular with Beckhoff and Omron), PROFINET IRT (Siemens), EtherNet/IP with CIP Motion (Allen-Bradley), and CC-Link IE (Mitsubishi Electric). Some legacy systems still utilize CANopen or RS-485 Modbus.
Can I replace a servo drive with a different brand?
Yes, it is often possible to swap servo drives from different manufacturers, provided you match the power ratings and the encoder feedback interface. However, proprietary motion profiles or specialized safety functions (like STO over a network) may require logic changes in the PLC or motion controller when switching brands, such as moving from Allen-Bradley to Delta.
Do I need a separate motion controller if I have a servo drive?
The motion controller acts as the 'brain' of the system, calculating the trajectories and command paths for complex movements like multi-axis synchronization or CNC interpolation. The servo drive is the 'muscle,' executing those commands by powering the motor and maintaining closed-loop control at the hardware level.
What are the benefits of a multi-axis servo system?
Single-axis drives control one motor independently, while multi-axis systems involve a shared DC bus and multiple inverter modules. Multi-axis configurations, like the Allen-Bradley Kinetix 5700 or Siemens SINAMICS S120, are more space-efficient and energy-efficient because they can share energy between regenerating and motoring axes.
Why is regenerative braking important in motion control?
Regenerative braking occurs when a decelerating motor acts as a generator, sending energy back to the drive. If this energy isn't managed by a dynamic braking resistor or a regenerative power supply (which feeds energy back to the grid), it can result in an overvoltage fault (DC bus overvoltage) and potentially damage the drive electronics.
What are the most common causes of servo drive failure?
Common failure points include DC bus capacitor aging, cooling fan failure, and I/O terminal fatigue. Environmental factors like high ambient temperatures or conductive dust can lead to short circuits in the power stage (IGBTs). Regular firmware updates and heat sink cleaning are recommended for preventative maintenance.
What is Safe Torque Off (STO) in servo drives?
STO is a safety function that removes power from the motor without disconnecting the drive from the main power supply, preventing the motor from starting unexpectedly. This is a standard feature in modern drives like the Schneider Lexium 32 or Bosch Rexroth IndraDrive, allowing for faster restarts after a safety event compared to a total power kill.
Why does my servo drive require tuning?
Tuning is the process of adjusting the PID (Proportional-Integral-Derivative) gains within the drive to optimize response time and minimize overshoot. While many modern drives from Lenze or Omron offer 'auto-tuning' features, high-inertia loads or flexible couplings often require manual fine-tuning to prevent mechanical resonance and oscillation.
Machine down? Get a fast quote on the parts you need.
New, surplus, and refurbished industrial automation options. Request a quote or speak directly with an automation specialist for emergency sourcing.